CMPS-16P21GC

L2+ Managed PoE Switch

16-Port 10/100/1000M PoE and 2 Gigabit SFP/RJ45 Combo Ports (PoE 270W)

 

  16-Port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Copper Combo Ports

  IEEE 802.3at/af PoE, up to 30W per Port

  Layer 2+ Full Managed Software Features with MSTP, LACP, IGMP Snooping, LLDP, sFlow, 802.1X, RADIUS, TACAS+, and ACL

  DHCP Server/Relay/Snooping

  Voice VLAN for VoIP Devices

  PD Alive Check & PoE Scheduling

  Automatically adjust Fan Speed Function

 



  • Category: Managed PoE Switches
  • SKU: CMPS-16P21GC

Overview

Product Features

Downloads

Introduction

The CMPS-16P21GC is a 16-port 10/100/1000M PoE switch with 2 Gigabit SFP/RJ45 combo ports, designed to enhance the network connection in small to medium environments. The 16 PoE ports support IEEE 802.3at/af PoE technology, providing up to 30W per port with a maximum transmission distance of 100 meters. The switch is equipped with an AC to DC power module to support the PoE power budget. The two SFP/RJ45 combo ports support both 100m and Gigabit fiber transceivers for long-distance transmission. Additionally, the switch offers advanced Layer 2+ management software features for PoE control, network management, monitoring, and security, making it an excellent choice for optimizing network performance, efficiency, and high PoE power consumption.

 

IEEE 802.3at/af Power over Ethernet (PoE) Ports

This switch converts standard 100~240V AC power into low-voltage DC, which is delivered over existing LAN cables to power IEEE 802.3at/af compliant network devices. It includes PoE detection to ensure that power is only supplied to devices that support 802.3at/af, while data is transmitted to non-compliant devices. Adding this switch to your network simplifies the deployment and management of devices like access points, IP cameras, A/v extenders, etc.

 

2 Gigabit RJ45 Copper/SFP Combo Ports

The Switch features two Gigabit Copper/SFP combo ports, ideal for uplinks to servers, storage, or other devices, providing flexible long-distance transmission options.

 

Full Layer 2+ Management Features

The switch comes with comprehensive Layer 2+ management capabilities, offering features such as:

·       Support for up to 4K 802.1Q VLANs, including advanced protocol VLANs, private VLANs, and MVR.

·       Eight physical queues for Quality of Service (QoS).

·       IPv4/IPv6 multicast filtering.

·       Rapid Spanning Tree Protocol (RSTP) to prevent network loops.

·       Multiple Spanning Tree Protocol (MSTP) for VLAN integration with spanning tree.

·       LACP, LLDP, sFlow, port mirroring, cable diagnostics, and robust network security features.

·       It supports out-of-band management through the console CLI and in-band management via SNMP and a web-based GUI.

 

IGMP Snooping for AV-over-IP and KVM-over-IP Support

The CMPS-16P21GC is designed with IGMP Snooping to efficiently manage multicast traffic. This is essential for AV-over-IP and KVM-over-IP solutions, ensuring smooth transmission of multimedia streams and keyboard-video-mouse data without overloading the network. IGMP Snooping optimizes the flow of multicast data, directing it only to the intended recipients, thus improving network performance in environments where real-time streaming and IP-based device control are critical.

 

Advanced Security

The switch includes several advanced security measures, such as:

·       HTTPS and SSH for secure management.

·       Secure login passwords and configuration packets.

·       Port binding, which restricts access to specific MAC addresses.

·       802.1X port-based access control, requiring user authentication before accessing the network.

·       AAA (Authentication, Authorization, and Accounting) with RADIUS and TACACS+ server integration.

·       Layer 2+ Access Control Lists (ACL) for defining access privileges based on IP address, MAC address, or port number.

 

PD Alive Check

With the PD Alive Check feature, the Switch can detect and monitor PoE-powered devices (e.g., IP cameras) via their IP addresses. If the switch does not receive a response from a device, it automatically performs a power cycle (turning PoE power off and then on) on the port, rebooting the connected device. Users can configure detection intervals, retry attempts, and the time period before a power cycle via the switch’s PoE configuration page.

 


Interface


10M/100M/1Gbps RJ45 Port

16

100M/1Gbps SFP and 1Gbps RJ45 Combo Port

2

Console Port for CLI Management

1

System Performance


Packet Buffer

4Mb

NOR Flash Memory

16Mb

SDRAM Memory (DDR2)

128Mb

MAC Address Table Size

8K

Jumbo Frame

9KB

Switching Capacity

36Gbps

Forwarding Rate (64-byte)

26.784Mpps

PoE Features


PoE Power Output

Per Port: IEEE 802.3af/at

Max. 15.4W/30W

Number of PSE Port

16

PoE Type

Upper Ports (Port 1, 3… 13, 15) Mode A

Lower Ports (Port 2, 4… 14, 16) Mode B

Max. Power Consumption

310W

Max. PoE Budget

270W

External/Internal Power

Internal Power

Power Feeding Detecting Capability on PD

PD Alive Check

PD Classification

PoE Scheduling

Power Management (Per Port)

Enable/Disable PoE Per Port

Priority Setting Per Port

Power Level Setting Per Port

Overloading Protection

L2 Features

Auto-Negotiation

Auto MDI/MDIX

Flow Control (Duplex)

802.3X (Full)

Back-Pressure (Half)

Spanning Tree

IEEE 802.1D (STP)

IEEE 802.1w (RSTP)

IEEE 802.1s (MSTP)

VLAN

VLAN Group

4K

Tagged Based

Port-Based

Q-in-Q

Voice VLAN

Voice VLAN with OUI

Link Aggregation

IEEE 802.3ad with LACP

Static Trunk

Max. Static Aggregation Group

9

Max. Port Per Static Aggregation Group

8

IGMP Snooping

IGMP Snooping v1/v2/v3

Supports 1024 IGMP groups

IGMP Static Multicast Addresses

Supports 1024 static multicast addresses

IPv6   MLD Snooping

Supports 1024 MLD groups

MLD Static Multicast Addresses

Supports 1024 static multicast addresses

Querier, Immediate Leave

Storm Control (Broadcast / Multicast / Unknown Unicast)

Loop Protection

QoS Features

Number of Priority Queue

8 queues/port

Rate Limiting

Ingress

Yes, 1KBps/1pps

Egress

Yes, 1KBps/1pps

DiffServ (RFC2474 Remarking)

Scheduling (WRR, Strict, Hybrid)

CoS

IEEE 802.1p

IP ToS Precedence, IP DSCP

Security

Management System Username / Password Protection

User Privilege

Set User Privilege up to 15 Level

Port Security (MAC-based)

IEEE 802.1x Port-based Access Control

ACL (L2/L3/L4)

IP Source Guard

RADIUS (Authentication, Authorization, Accounting)

TACACS+

HTTP & SSL (Secure Web)

SSH v2.0 (Secured Telnet Session)

MAC / IP Filter

L3 Features

Static Route

Management

Command Line Interface (CLI)

Web Based Management

Telnet

Access Management Filtering

SNMP / Web / SSH / Telnet

Firmware Upgrade via HTTP

Dual Firmware Images

Configuration Download / Upload

SNMP (v1/v2/v3)

RMON (1, 2, 3 & 9 groups)

DHCP (Client / Relay / Option 82 / Snooping / Server)

System Event / Error Log

TFTP (Trivial File Transfer Protocol)

NTP / LLDP

Cable Diagnostics

IPv6 Configuration

Port Mirroring

Virtual Stacking – Virtual Host allowing management of all switches via 1 set of IP   address

e-Spider – Allows searching and setting the switches located on the LAN

Physical Characteristics

Dimension (W x D x H)

330 x 210 x 44 mm

Reset Button

N/A

LED

Power, Link/Act, PoE

Cooling

Fan Cooling

Enclosure

Metal

Installation

Desktop / Rackmount

Weight

3.5 Kg

System Power Requirement

System Power Input

44 – 57 VDC

Max. System Power Consumption

30W

Power Supply Information

Internal Power Supply

Input: 100-240V, 50/60Hz, 5.0A Max.

Output: 54 VDC / 5.74A, 310W Max.

Environment Limits

Operating Temperature

0 ~ 50°C

Storage Temperature

-10 ~ 70°C

Operating Humidity

10 ~ 90% (non-condensing)

Storage Humidity

10 ~ 90% (non-condensing)

Certifications

Electromagnetic Emissions (emc)

CE, FCC, UKCA

Safety

EN62368-1

Protection

ESD

DC Contact 4KV, Air 8KV

Surge

AC Line to Line 1KV, Line to Ground 2KV

Standard

IEEE   802.3 – 10Base-T

IEEE   802.3u – 100Base-TX

IEEE   802.3ab – 1000Base-T

IEEE   802.3z – 1000Base-SX/LX

IEEE   802.3af Power over Ethernet (PoE)

IEEE   802.3at Power over Ethernet (PoE+)

IEEE   802.3az – Energy Efficient Ethernet (EEE)

IEEE   802.3x – Flow Control

IEEE   802.1Q – VLAN

IEEE   802.1v – Protocol VLAN

IEEE   802.1p – Class of Service

IEEE   802.1D – Spanning Tree

IEEE   802.1w – Rapid Spanning Tree

IEEE   802.1s – Multiple Spanning Tree

IEEE   802.3ad – Link Aggregation Control Protocol (LACP)

IEEE   802.1ab – LLDP (Link Layer Discovery Protocol)

IEEE   802.1X – Access Control

 


Not sure which product to use? Click Here

Related PRODUCTS