Enterprise KVM Matrix 136-Port
1. Adopting advanced hardware processing structure and no operating system, it completely eliminates IT virus intrusion and hacker attacks. One fiber optic KVM integrated seat management host chassis is configured to meet a total port count of ≥ 136 ports, with a single device integrated design. It has KVM management function, video switching function, splicing function, and comprehensive audio and video control function.
2. Adopting a non switch closed-loop all fiber engine architecture and non TCP/IP protocol, it does not require the use of existing network resources. It carries and manages video, audio, and control information through dedicated physical fiber channels, ensuring high security and confidentiality.
3. The device supports mixed input and output card insertion, and the card slot is a bidirectional data channel slot that supports input and output customization. A single card slot can support both input and output boards. Flexible configuration of input and output signal types and channel numbers.
4. LCD display function: The front panel has an LCD display screen of ≥ 3.5 inches and 16 shortcut switch keys. The front panel can be operated and the LCD screen status can be read. The LCD screen can display the signal source status and channel display in real time, MAC and IP addresses, baud rate, and can be used for signal switching and pre plan storage and calling.
5. A single fiber optic seat I/O board has 16 LC fiber optic interfaces. No adapter cables or conversion devices are required, and a single input and output board can support no less than 8 HDMI signals.
6. The host has port adaptation technology, which enables the fiber optic cable to be inserted into another spare port. The host realizes automatic addressing and recognition, and the data signal is quickly recovered. The signal recovery time is ≤ 1s
7. Multiple backup methods, supporting point-to-point redundant backup, semi redundant backup, and fully redundant backup mechanisms. Any input signal supports dual line hot backup, and the equipment can automatically switch to the backup line or backup point-to-point link in case of main line failure. Supports backup of two hosts, and automatically switches to the backup system in case of any host or link failure. The switching process is imperceptible, does not require manual intervention, and does not require resetting. Automatic hot jump time ≤ 8ms.
8. Fiber optic processing technology using lossless and uncompressed non coding and decoding methods, with bidirectional interaction capabilities for audio, video, and control. Delay<1ms.
Parameter | Enterprise KVM Matrix | |||
Interface | Chassis size | 3.5U | 7U | 12.5U |
Number of slots | 11 | 17 | 36 | |
Number of ports | 88 | 136 | 288 | |
Input output mixed insertion | ✔ | ✔ | ✔ | |
Redundant power supply | ✔ | ✔ | ✔ | |
Video parameters | Fiber optic board interface | Single card 8-channel high-speed dual core LC fiber optic interface input/output | ||
Fiber optic interface | LC connector | |||
Fiber type | Multi mode/Single mode (optional) | |||
wavelength | Multimode: 850nm/Single mode: 1310nm | |||
transmission distance | Single mode fiber optic 20km, multi-mode fiber optic 500m | |||
signals | DVI/HDMI/VGA/YPbPr/CVBS/SDI/HDbaseT/Fiber/IP/Fiber KVM/DP/HDMI2.0 (optional) | |||
Signal protocol | DVI1.0 protocol, HDMI2.0 compatible with HDMI1.4 standard, supports HDCP1.3 protocol | |||
resolution | Maximum 3840 x 2160@60Hz , downward compatible with normal resolution | |||
Audio parameters | frequency response | 20 Hz ~ 20 kHz | ||
Signal type | Unbalanced stereo audio | |||
Signal format | AAC/AC3/AIF/FLAC/M44/MP3/MPC/OGG/WAV/WMA | |||
RS232 Control | interface | RS-232,DB9 | ||
Baud rate | Min:9600bps Max:115200bps | |||
port structure | 2 = TX,3 = RX,5 = GND | |||
software | Visual comprehensive management platform | |||
Network control | interface | RJ-45 | ||
Protocol | TCP/IP | |||
rate | 10M~1000M,Full duplex or half duplex | |||
Electrical specifications | source | 100V~240VAC 50/60Hz | ||
power dissipation | ≤1200W | |||
Working | 0℃-50℃,10%-90% | |||
Storage | -20℃-60℃,10%-90% | |||
Chassis specifications | Standard industrial control case | |||
hours | 365 days×24 hours |